Brass
Brass Strip · Brass Sheet
Copper-zinc alloy (Cu-Zn) products covering mainstream grades such as H62 and H65. They combine good mechanical strength, excellent workability and an attractive golden appearance, and are widely used in electronic hardware, architectural decoration, auto parts and consumer goods. Custom thicknesses, widths and tolerance grades available.
· ລັກສະນະຂອງຜະລິດຕະພັນ
- 61–91% copper content (Cu)
- 320–680 tensile strength (MPa)
- ຂອບເຂດຄວາມໜາ 0.1-6.0 ມມ
- ຄວາມກວ້າງສູງສຸດ 1200 mm
ຕົວກຳນົດທີ່ສຳຄັນ
ເບີທອງແດງ
ໂປຣແກຣມ ສໍາລັບ ປະເທດ (GB) ແລະ ແປກ່ຽວກັບ ກ່ຽວ ກັບ ເລື່ອງ ກ່ຽວ ກັບ ເດືອນ ແກ້ໄຂ ເວລາ ແລະ ຕ້ອງການ ທີ່ ຈະ ປົກຄອງ.
ໂປຣເເກຣມແກຣມແກຣມແກຣມ
ໂປຣເເກຣມແກຣມແກ້ໄຂ ເວລາ ແລະ ໂປຣແກ້ໄຂ ເເລະ ບໍ່ມີຕັ້ງຄ່າຄູບູນຕຸ.
| ໂປຣເເກຣມ | ຂອບເຂດຄວາມໜາ | ເກີດຂໍ້ຜິດພາດ | ຄວາມຍາວ (ແຜ່ນ) | ໝາຍເຫດ |
|---|---|---|---|---|
| ແຖບທອງเหลือง | 0.1 - 6.0 ມມ | 20 - 1200 mm | ສົ່ງມາໃນຮູບແບບຂອງກະທົງ | ໂປຣເເກຣມ |
| Brass sheet | ≥0.5 – 6.0 mm | 20 - 1200 mm | ≤ 6000mm | ໂປຣເເກຣມ 0.5 mm |
ອາການ
- ໂປຣ (M/O) - ໂປຣເເກຣມແກຣມແກ້ໄຂ ກ່ຽວກັບແກ້ໄຂ
- ເຄິ່ງແຂງ (Y2/H) - ອໍານາດ ແລະ ເອົາເວຍ
- ແຂງ (Y/EH)— High strength, suitable for structural parts and spring elements
- ກ່ຽວກັບ (T/SH) - ອໍານາດ ກ່ຽວ ກັບ ເດືອນ
ກ່ຽວກັບ ຫາມ
- ໂປຣເເກຣມ ກ່ຽວກັບແກຣມແກຣມ (COA) ກ່ຽວກັບ ຂໍ້ ມອບ ຫມາຍ ເຖິງ
- ມີໃບຢັ້ງຢືນຈາກພາກສ່ວນທີສາມ (SGS, CTI ແລະອື່ນໆ)
- ສອດຄ່ອງກັບມາດຕະຖານແຫ່ງຊາດ GB/T 2059 (ແຖບ) ແລະ GB/T 2040 (ແຜ່ນ)
- Supply to international standards such as ASTM B36, JIS H3100 and EN 12163
ໂປຣເເກຣມແກຣມ
Typical physical and mechanical properties of brass (based on H62/H65).
| ຊັບສິນ | H62 value | H65 value | ໂປຣເເກຣມ | ໝາຍເຫດ |
|---|---|---|---|---|
| ຖ້ອງ | 8.43 – 8.50 | 8.47 – 8.53 | G/cm³ | Varies with zinc content |
| ເເລະ ໂປຣເເກຣມ | ~27% IACS | ~27% IACS | % IACS | Lower than pure copper but acceptable |
| ການນຳຄວາມຮ້ອນ | 109 – 117 | 111 – 119 | W/(m·K) | Moderate thermal conductivity |
| ຈຸດຫລອມຕົວ | 905 – 925 | 915 – 935 | °C | ຂອບເຂດແຫຼວ-ຂອງແຂງ |
| ຄວາມແຂງແກ່ນຕໍ່ການດຶງ (M) | ≥290 | ≥270 | ເມກະປາ | ສະພາບອ່ອນ ທີ່ໄດ້ຮັບການປົວຄວາມຮ້ອນ |
| ຄວາມແຂງແກ່ນຕໍ່ການດຶງ (Y) | 420 – 550 | 380 – 500 | ເມກະປາ | ເກີດຂໍ້ຜິດພາດງ |
| ການຍືດຕົວ (M) | ≥40 – 50% | ≥45 – 55% | % | ຄວາມຍືດຫຍຸ່ນໃນສະພາບອ່ອນ |
| ຄວາມແຂງ (HV) | 80 – 150 | 70 – 130 | ເອັຊວີ | Varies with temper |
| ເດືອນ | td>ດີ | ດີ | — | HPb59-1 is best |
ການສະໝັກໃຊ້ຫຼັກ
With good mechanical strength, an attractive appearance and easy workability, brass is widely used across industries.
Electronic Hardware
Connector terminals, plugs and sockets, switch contacts, relay springs, heat sink fins
ໂປຣເເກຣມ
Door handles, lock plates, faucet valve cores, decorative trims, hardware fittings, sanitary ware
Precision Manufacturing
Watch parts, instrument housings, optical instrument mounts, precision gears, bushings and bearings
Automotive Industry
Radiator tubing, brake components, sensor housings, wiring terminals, interior trim
Consumer Goods
Buttons, zipper teeth, eyeglass frames, jewelry, stationery parts, musical instrument parts
Pipes & Valves
Pipe fittings, valve bodies, flanges, pump impellers, marine pipe fittings
Need custom specifications or a volume quote?
We provide complete certificates of analysis (COA), third-party test reports and export packaging.
Small trial batches and long-term supply agreements supported. Our team will provide technical selection advice.