ለሊቲየም ባትሪ ኮፐር ፎይል
ቢ.
Double-shiny copper foil designed for lithium-ion battery anode current collectors. Soft enough for winding processes, with thickness steadily moving from 12 μm toward 4 μm, it is a core base material for EV power batteries.
· ምርት ገጽታዎች
- 4/6/8/10 ሜክሲኮች
- ጥልቀት
- ≥ 30 ኪሎ / ሚ.
- ≥ 5%
አውቶማቲክ
የፊደል ቅርጽ
ምርት መግለጫ
ምርት መግለጫ
BCF (Battery Copper Foil) refers to electrodeposited copper foil used as the anode current collector in lithium-ion batteries. It is a completely different product category from PCB copper foil: PCB foil is engineered for surface roughness (for bonding strength and signal transmission), whereas BCF is engineered for surface smoothness, softness and mechanical strength, because its job is to carry the active material coating inside the battery and provide a path for current collection.
BCF ሁለት ብራጭ (ሁለት ብርሃን) ጨረር ያዘጋጀል: ሁለቱም ወገኖች ቀላልና መስተዋት የሚመስል ናቸው፡ የከበደን ሕክምና ሳይሆን አይቀርም። ይህ ዕቃ ሦስት ቁልፍ ዓላማዎችን ይሠራል: - ① የኦኖድ ሉሪ (ግራፊት / ሲሊኮን ካርቦን ምድራዊ ቡድኖች) ለአንድ አካባቢ አካባቢ ይሰጣል) በውስጥና በውስጣው መካከል ጠንካራ ጠንካራ ነው ፡ ፡ ድላሚኒሽን በሽታ መውጣት ወቅት ድልሚነሽነትን መከላከል፤
በBiC በጣም ውፍረት ውስጥ 1 ሜክሚም መቀነስ ባተር የኃይል ቁንጠር ያደርጋል የንቁ! ኢንዱስትሪው ከ12 ሜክሚም መጀመሪያ ላይ ወደ ዛሬ 8 ሚሚም / 6 ሜክሚም ዋና ዋነኛ ግዛት 4.5 ሜክሚም እና 4 ሜክሚ ምትር ቀዝቃዛ ፊል የሚለው ቃል ከፍተኛ ቴክኒካዊ ቦርክ ማለት ነው: - የፍጥነት ጥንካሬ ፣ ረጅምነትና የአካባቢ ክብደት ትክክለኛ ሚዛናዊ መሆን አለበት ።
ቁልፍ ሂደት ባሕርይ
- የፊደል ቅርጽ: በሁለቱም ወገኖች ሁለት ጠንካራ ጎን የለበትም ።
- ዋነኛ ውብ: Four mainstream grades: 4 μm / 6 μm / 8 μm / 10 μm
- ጥንካሬ: ≥ 30 ኪሎ / ሚ.
- ቀመጥ: ≥ 3-5
- ንጽሕና: ≥ 99.7% (ኤሌክትሮኒክ ምሽት); ጥቂት ንብረቶች ኤሌክትሮኬሚካል የተረጋጋነት ያደርጋል
- ቀለም: ቀላልና ነፋስ ቀላል ሆነው ለፍጥነትና ለተለያዩ ፍጥነት የሚስማማ
ድርጊት
ምርጫዎች
የሚገኙ ምርጫዎች
እነዚህ አራት ዋነኛ ውፍረት የሚገኙ ሲሆን የልማድ እድገት አገልግሎትም ይገኛሉ ።
ፋይል ምረጡ
- Rolls: width up to 1300 mm (fits wide-format coaters)
- የተለመደው ስሜት ያለው ስፋት
- Optional packaging with release film
Quality Certifications
- ISO 9001 quality management system certification
- በጣም ተቀባይነት ባለሪዎች (CAT, BYD, LGES ሙረት)
- Compliant with GB/T 24588-2023 national standard for electrodeposited copper foil for lithium batteries
ፕሮግራሞች
ፕሮግራም
የኤሌክትሮኒክ ሥራዎችን ቁልፍ ክፍል ማገልገሉ ።
EV Power Batteries
BEV / PHEV power batteries, with 8 μm / 6 μm as the mainstream
የኃይል መቀመጫ ሲስተም (ESS)
Grid-scale storage, residential storage, telecom base station backup power
Consumer Lithium Batteries
Smartphones, laptops, TWS earbuds, smart wearables
Electric Two- and Three-Wheelers
Shared e-bikes, electric motorcycles, low-speed EVs
Power Tools & Garden Equipment
Battery packs for cordless drills, lawn mowers and cleaning equipment
Drones & Low-Altitude Economy
eVTOL aircraft batteries, industrial drone power batteries
ዋነኛ ጥቅሞች
ዋነኛ ምርጫዎች
ሕንፃ መሥራት የፉክክርነትን ልዩነት ነበረው ።
Thinner Foil, Higher Energy Density
Going from 10 μm to 6 μm can raise cell energy density by about 5–8%
Double-Shiny Surface for Maximum Adhesion
Mirror-smooth surfaces ensure uniform anode slurry coating and high bond strength
Soft Enough for High-Speed Winding
Optimized flexibility matched to 80–120 m/min high-speed winding and coating
High Purity for Long Cycle Life
≥ 99.7% electronic-grade purity, impurities controlled at ppm level to suppress side reactions
ፕሮግራም
Widths up to 1300 mm fit next-generation wide coating lines and reduce slitting loss
Full Thickness Range
All four mainstream grades (4/6/8/10 μm), a one-stop solution from consumer electronics to EVs
Get BCF Copper Foil Samples & Technical Data
የቴክኖሎጂ ቡድናችን ጥሩ ውድ ውጤትና ውጤታማ የሆነውን ልዩ ልዩ ልዩ ትርጉም ሊያደርግ ይችላሉ ።