China Factory for Single Shiny Copper Foil - Copper Strip for Lead Frame – CIVEN
China Factory for Single Shiny Copper Foil - Copper Strip for Lead Frame – CIVEN Detail:
Product Introduction
The material for lead frame is always made from alloy of copper, Iron and phosphorus, or copper, nickel and silicon, which have the common alloy No. of C192(KFC),C194 and C7025.These alloys have high strength and performance.C194 and KFC are most representative for copper, iron and phosphorus alloy, they are the most common alloy materials.
C7025 is the alloy of copper and phosphorus, silicon. It has high thermal conductivity and high flexibility, and do not need heat treatment, also it’s easy for stamping. It has high strength, excellent thermal conductivity properties, and very suitable for lead frames, especially for assembly of high density integrated circuits.
Copper alloys for lead frames are roughly divided into copper iron system, copper nickel silicon system, copper chromium system, copper nickel tin system (jk-2 alloy), etc. ternary and quaternary copper alloys can achieve better performance and lower cost than traditional binary alloys. Copper iron alloys have the most brands and have better mechanical strength, stress relaxation resistance and low creep, It is a kind of good lead frame material. Due to the needs of lead frame fabrication and packaging applications, in addition to high strength and high thermal conductivity, the materials are also required to have good brazing performance, process performance, etching performance, oxide film bonding performance, etc. The materials are developing in the direction of high strength, high conductivity and low cost. A small amount of various elements are added to copper to improve the alloy strength (so that the lead frame is not easy to deform) and comprehensive properties without significantly reducing the conductivity. The materials with tensile strength above 600MPa and conductivity greater than 80% IACS are the research and development hotspot. The copper strip is required to be high surface, accurate plate shape, uniform performance, continuous thinning of strip thickness, gradual thinning from 0.25mm to o.15mm and 0.lmm, and ultra-thin and profiled of 0.07-0.qiao.
Main Technical Parameters
Chemical composition
|
Name |
Alloy No. |
Chemical Composition(%) |
|||||
|
Fe |
P |
Ni |
Si |
Mg |
Cu |
||
|
Copper-Iron-Phosphorus Alloy |
QFe0.1/C192/KFC |
0.05-0.15 |
0.015-0.04 |
— |
— |
— |
Rem |
|
QFe2.5/C194 |
2.1-2.6 |
0.015-0.15 |
— |
— |
— |
Rem |
|
|
Copper-Nickel-Silicon Alloy |
C7025 |
—– |
—– |
2.2-4.2 |
0.25-1.2 |
0.05-0.3 |
Rem |
Technical Parameters
|
Alloy No. |
Temper |
Mechanical properties |
||||
|
Tensile Strength |
Elongation |
Hardness |
Elctricity Conductivity |
Thermal Conductivity W/（m.K） |
||
|
C192/KFC/C19210 |
O |
260-340 |
≥30 |
＜100 |
85 |
365 |
|
1/2H |
290-440 |
≥15 |
100-140 |
|||
|
H |
340-540 |
≥4 |
110-170 |
|||
|
C194/C19410 |
1/2H |
360-430 |
≥5 |
110-140 |
60 |
260 |
|
H |
420-490 |
≥2 |
120-150 |
|||
|
EH |
460-590 |
—- |
140-170 |
|||
|
SH |
≥550 |
—- |
≥160 |
|||
|
C7025 |
TM02 |
640-750 |
≥10 |
180-240 |
45 |
180 |
|
TM03 |
680-780 |
≥5 |
200-250 |
|||
|
TM04 |
770-840 |
≥1 |
230-275 |
|||
Note: Above figures based on the material thickness 0.1~3.0mm.
Typical Applications
● Lead frame for Integrated Circuits, Electrical connectors, Transistors, LED stents.
Product detail pictures:
Related Product Guide:
We keep on with the basic principle of "quality to start with, support very first, continuous improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the quality objective. To great our service, we offer the items with all the superior top quality at the reasonable selling price for China Factory for Single Shiny Copper Foil - Copper Strip for Lead Frame – CIVEN , The product will supply to all over the world, such as: Netherlands, Paraguay, Peru, So far our merchandise have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have now 13years experienced sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to provide our customers with high quality items and excellent service.
By Polly from Johor - 2018.07.12 12:19
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Sahid Ruvalcaba from Florida - 2018.06.05 13:10
