Top Quality Foils Inc - Copper Strip for Lead Frame – CIVEN
Top Quality Foils Inc - Copper Strip for Lead Frame – CIVEN Detail:
Product Introduction
The material for lead frame is always made from alloy of copper, Iron and phosphorus, or copper, nickel and silicon, which have the common alloy No. of C192(KFC),C194 and C7025.These alloys have high strength and performance.C194 and KFC are most representative for copper, iron and phosphorus alloy, they are the most common alloy materials.
C7025 is the alloy of copper and phosphorus, silicon. It has high thermal conductivity and high flexibility, and do not need heat treatment, also it’s easy for stamping. It has high strength, excellent thermal conductivity properties, and very suitable for lead frames, especially for assembly of high density integrated circuits.
Copper alloys for lead frames are roughly divided into copper iron system, copper nickel silicon system, copper chromium system, copper nickel tin system (jk-2 alloy), etc. ternary and quaternary copper alloys can achieve better performance and lower cost than traditional binary alloys. Copper iron alloys have the most brands and have better mechanical strength, stress relaxation resistance and low creep, It is a kind of good lead frame material. Due to the needs of lead frame fabrication and packaging applications, in addition to high strength and high thermal conductivity, the materials are also required to have good brazing performance, process performance, etching performance, oxide film bonding performance, etc. The materials are developing in the direction of high strength, high conductivity and low cost. A small amount of various elements are added to copper to improve the alloy strength (so that the lead frame is not easy to deform) and comprehensive properties without significantly reducing the conductivity. The materials with tensile strength above 600MPa and conductivity greater than 80% IACS are the research and development hotspot. The copper strip is required to be high surface, accurate plate shape, uniform performance, continuous thinning of strip thickness, gradual thinning from 0.25mm to o.15mm and 0.lmm, and ultra-thin and profiled of 0.07-0.qiao.
Main Technical Parameters
Chemical composition
|
Name |
Alloy No. |
Chemical Composition(%) |
|||||
|
Fe |
P |
Ni |
Si |
Mg |
Cu |
||
|
Copper-Iron-Phosphorus Alloy |
QFe0.1/C192/KFC |
0.05-0.15 |
0.015-0.04 |
— |
— |
— |
Rem |
|
QFe2.5/C194 |
2.1-2.6 |
0.015-0.15 |
— |
— |
— |
Rem |
|
|
Copper-Nickel-Silicon Alloy |
C7025 |
—– |
—– |
2.2-4.2 |
0.25-1.2 |
0.05-0.3 |
Rem |
Technical Parameters
|
Alloy No. |
Temper |
Mechanical properties |
||||
|
Tensile Strength |
Elongation |
Hardness |
Elctricity Conductivity |
Thermal Conductivity W/（m.K） |
||
|
C192/KFC/C19210 |
O |
260-340 |
≥30 |
＜100 |
85 |
365 |
|
1/2H |
290-440 |
≥15 |
100-140 |
|||
|
H |
340-540 |
≥4 |
110-170 |
|||
|
C194/C19410 |
1/2H |
360-430 |
≥5 |
110-140 |
60 |
260 |
|
H |
420-490 |
≥2 |
120-150 |
|||
|
EH |
460-590 |
—- |
140-170 |
|||
|
SH |
≥550 |
—- |
≥160 |
|||
|
C7025 |
TM02 |
640-750 |
≥10 |
180-240 |
45 |
180 |
|
TM03 |
680-780 |
≥5 |
200-250 |
|||
|
TM04 |
770-840 |
≥1 |
230-275 |
|||
Note: Above figures based on the material thickness 0.1~3.0mm.
Typical Applications
● Lead frame for Integrated Circuits, Electrical connectors, Transistors, LED stents.
Product detail pictures:
Related Product Guide:
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of Top Quality Foils Inc - Copper Strip for Lead Frame – CIVEN , The product will supply to all over the world, such as: Mozambique, Nepal, Adelaide, Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
By Marian from Madras - 2017.04.18 16:45
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Alice from Iraq - 2017.08.18 11:04
