Wholesale Dealers of Low Profile Copper Foil - RTF ED Copper Foil – CIVEN

Short Description:

Product Detail

Product Tags

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for Nickel Foil Roll, Emi Copper Tape, Copper Foil Strips, We are sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you. We also warmly welcome customers to visit our company and purchase our products.

Wholesale Dealers of Low Profile Copper Foil - RTF ED Copper Foil – CIVEN Detail:

Product Introduction

Reverse treated electrolytic copper foil (RTF) is a copper foil that has been roughened to varying degrees on both sides. This strengthens the peel strength of both sides of the copper foil, making it easier to use as an intermediate layer for bonding to other materials. Moreover, the different levels of treatment on both sides of the copper foil make it easier to etch the thinner side of the roughened layer. In the process of making a printed circuit board (PCB) panel, the treated side of the copper is applied to the dielectric material. The treated drum side is rougher than the other side, which constitutes a greater adhesion to the dielectric. This is the main advantage over standard electrolytic copper. The matte side does not require any mechanical or chemical treatment prior to the application of photoresist. It is already rough enough to have good laminating resist adhesion.

Specifications

CIVEN can supply RTF electrolytic copper foil with nominal thickness of 12 to 35µm up to 1295mm width.

Performance

The high temperature elongation reversed treated electrolytic copper foil is subjected to a precise plating process to control the size of the copper tumors and distribute them evenly. The reversed treated bright surface of the copper foil can significantly reduce the roughness of the copper foil pressed together and provide sufficient peel strength of the copper foil. (See Table 1)

Applications

Can be used for high-frequency products and inner laminates, such as 5G base stations and automotive radar and other equipment.

Advantages

Good bonding strength, direct multi-layer lamination, and good etching performance. It also reduces the potential for short circuit and shortens the process cycle time.

Table 1. Performance

Classification		Unit	1/3OZ (12μm)	1/2OZ (18μm)	1OZ (35μm)
Cu Content		%	min. 99.8
Area Weigth		g/m²	107±3	153±5	283±5
Tensile Strength	R.T.(25℃)	Kg/mm²	min. 28.0
	H.T.(180℃)		min. 15.0	min. 15.0	min. 18.0
Elongation	R.T.(25℃)	%	min. 5.0	min. 6.0	min. 8.0
	H.T.(180℃)		min. 6.0
Roughness	Shiny(Ra)	μm	max. 0.6/4.0	max. 0.7/5.0	max. 0.8/6.0
	Matte(Rz)		max. 0.6/4.0	max. 0.7/5.0	max. 0.8/6.0
Peel Strength	R.T.(23℃)	Kg/cm	min. 1.1	min. 1.2	min. 1.5
Degraded rate of HCΦ(18%-1hr/25℃)		%	max. 5.0
Change of color(E-1.0hr/190℃)		%	None
Solder Floating 290℃		Sec.	max. 20
Pinhole		EA	Zero
Preperg		—-	FR-4

Note: 1. The Rz value of copper foil gross surface is the test stable value, not a guaranteed value.

2. Peel strength is the standard FR-4 board test value (5 sheets of 7628PP).

3. Quality assurance period is 90 days from the date of receipt.

Product detail pictures:

Related Product Guide:

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Wholesale Dealers of Low Profile Copper Foil - RTF ED Copper Foil – CIVEN , The product will supply to all over the world, such as: Dominica, Argentina, Rome, We only supply quality items and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom merchandise etc that can according to customer's requirement.

Conductive Copper Tape