CIVEN-produkter

A specialty copper foil that retains excellent elongation at high temperature (180°C): its high-temperature elongation is at least 30% of the room-temperature value. Multilayer PCB lamination generates high heat, and ordinary copper foil tends to recrystallize, causing "copper cracks" in inner-layer circuits. HTE solves this problem through a special alloy composition and heat treatment process. It is one of the high-end copper foil categories with the largest market share in China and is widely used in multilayer boards and high-Tg laminates.

The shiny side of the electrodeposited foil is also roughened, giving both sides good bonding strength. The two sides are treated to different degrees: the side facing the dielectric is rougher for better adhesion, while the other side is thinner for easier etching. When used as inner-layer foil in multilayer boards, it eliminates the black-oxide treatment before lamination, improving production efficiency. It is one of the mainstream choices for high-frequency, high-speed copper clad laminates, balancing performance and cost.

En övergångsprodukt som först sänkte ytruffigheten till 3–4 μm. Dess fina kristallstruktur (< 2 μm) består av likabehandlade korn snarare än konventionella kolumnkristaller. med lager kristallisering och platta åsar. Jämfört med STD och RTF är förlusten av signalöverföring betydligt lägre. Att göra det till en kostnadseffektiv inträde i höghastighetskretsar. Inga rester av kopparpulver efter etsning, samt bättre yta och isoleringsmotstånd.

Ultra-smooth copper foil with surface roughness ≤ 2 μm, produced by precision electrodeposition. Both sides reach very low roughness, and the fine equiaxed grain structure ensures isotropy. It greatly reduces conductor loss caused by the skin effect, with Df optimizable to ≤ 0.002, and bonds excellently with low-loss substrates such as PTFE and hydrocarbon resins. It is the mainstay material for high-frequency, high-speed applications such as 5G communications and AI servers.

The smoothest surface among today's commercial copper foils, with Rz as low as 1–1.5 μm or even lower. Building on VLP, it approaches the physical limit of roughness and is designed for mmWave above 28 GHz and ultra-high-speed interconnects in AI training clusters. A single high-end AI server can use up to ten times as much HVLP as a conventional server. As global computing infrastructure expands, supply remains tight.

Electrodeposited copper foil dedicated to lithium-ion battery anode current collectors and one of the core base materials of lithium batteries. Unlike PCB copper foil, BCF has a double-shiny (bright on both sides) surface finish and is soft enough for battery winding processes, while offering excellent chemical and electrochemical stability. Thinner foil is the key path to higher energy density: reducing thickness from 12 μm to 6 μm or even 4–5 μm directly cuts battery weight by about 5–9% and lowers internal resistance, improving charge-discharge efficiency.